Setting a coordinate system

bjacobs July 11, 2024, 2:33pm 1

Is it possible to set the coordinate system for my UR10 CB3 off the face of the chuck in my lathe?

Topic		Replies	Views
UR5+vision - coordinate system difficulties URScript	16	6690	March 8, 2017
How to self-calibrate a UR5e with a physical marker Technical Questions	3	558	April 13, 2023
Base coordinate system documentation URScript	8	12117	November 25, 2024
Orientation of BASE coordinate system Technical Questions	1	1063	September 17, 2018
Sending 'movel' commands, how to change from base coordinate system to tool coordinates? URScript	2	922	June 9, 2022