# Waypoints\_1\_q in CB3

**URL:** <https://forum.universal-robots.com/t/waypoints-1-q-in-cb3/3365>\
**Category:** Product Wishlist\
**Created:** [December 29, 2018, 4:28am UTC](https://forum.universal-robots.com/t/waypoints-1-q-in-cb3/3365 "2018-12-29T04:28:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon3410933](https://avatars.discourse-cdn.com/v4/letter/a/a6a055/32.png) [@anon3410933](https://forum.universal-robots.com/u/anon3410933)\
**Post date:** [December 29, 2018, 4:28am UTC](https://forum.universal-robots.com/t/waypoints-1-q-in-cb3/3365/1 "2018-12-29T04:28:18Z")

</div>

hi everyone,

In the e-series there is the possibility to “show waypoints” under the “variables” section. This command show me 2 new variables for every point that I have created:  
waypoint\_XX\_p and waypoint\_XX\_q  
So if I want to know the joints position of a waypoint I know exactly which variable consult.  
There is already a variable that make the same thing int he CB series, or I have to create it everytime I need it?

---

<div class="post-metadata">

**Author:** ![jbm](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/jbm/32/614_2.png) [@jbm](https://forum.universal-robots.com/u/jbm)\
**Post date:** [January 2, 2019, 8:36am UTC](https://forum.universal-robots.com/t/waypoints-1-q-in-cb3/3365/2 "2019-01-02T08:36:26Z")

</div>

This feature is only applicable to Waypoints in e-Series.  
In e-Series all waypoints have a corresponding Pose and Joint Vector.
