# VNC to UR30 running Polyscope X 10.11.0

**URL:** <https://forum.universal-robots.com/t/vnc-to-ur30-running-polyscope-x-10-11-0/42916>\
**Category:** Robot Communication\
**Created:** [June 11, 2026, 1:47pm UTC](https://forum.universal-robots.com/t/vnc-to-ur30-running-polyscope-x-10-11-0/42916 "2026-06-11T13:47:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![alice.hierholz](https://avatars.discourse-cdn.com/v4/letter/a/a88e57/32.png) [@alice.hierholz](https://forum.universal-robots.com/u/alice.hierholz)\
**Post date:** [June 11, 2026, 1:47pm UTC](https://forum.universal-robots.com/t/vnc-to-ur30-running-polyscope-x-10-11-0/42916/1 "2026-06-11T13:47:06Z")

</div>

Hi, was anyone able to get a VNC to a UR30 running Polyscope X 10.11.0?