# URCap Installation Node Operator Interface

**URL:** <https://forum.universal-robots.com/t/urcap-installation-node-operator-interface/13821>\
**Category:** URCap Development\
**Created:** [April 21, 2021, 5:35pm UTC](https://forum.universal-robots.com/t/urcap-installation-node-operator-interface/13821 "2021-04-21T17:35:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon47255888](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@anon47255888](https://forum.universal-robots.com/u/anon47255888)\
**Post date:** [April 21, 2021, 5:35pm UTC](https://forum.universal-robots.com/t/urcap-installation-node-operator-interface/13821/1 "2021-04-21T17:35:49Z")

</div>

Hello to all,

I am trying to develop some kind of GUI for the operator to be used for START, STOP the robot, loading a program etc.  
I have designed the layout of the installation node but I cannot make it full screen or bigger that the space there.  
How can I make that when I click on the URcap from the installation node that I will have a pop up maybe not exactly full screen but bigger than the actual size and from there I can press the buttons?

Thank you very much in advance!