# Update UR10 PolyScope to newest version

**URL:** <https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948>\
**Category:** Technical Questions\
**Created:** [January 28, 2022, 2:57pm UTC](https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948 "2022-01-28T14:57:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon9713411](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@anon9713411](https://forum.universal-robots.com/u/anon9713411)\
**Post date:** [January 28, 2022, 2:57pm UTC](https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948/1 "2022-01-28T14:57:07Z")

</div>

Greetings,

I have been tasked to update two CB2UR10 robots to the newest version of PolyScope. I red that it is possible to go from CB2 to CB3 & e-series versions of the software, but when I tried to update to 3.0.16471, I just got an rerror message saying that I can’t upgrade from 1.8 to 3.0.

I also installed a new image on storage device, but when I plugged it in, nothing happened on reboot. Any tips/ideas?

Current version: 1.8.25319 (Oct 19 2016)

---

<div class="post-metadata">

**Author:** ![mbush](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/mbush/32/76_2.png) [@mbush](https://forum.universal-robots.com/u/mbush)\
**Post date:** [January 30, 2022, 3:40pm UTC](https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948/2 "2022-01-30T15:40:13Z")

</div>

Do you need to do a motherboard update on the CB2 to run CB3 software?

---

<div class="post-metadata">

**Author:** ![anon9713411](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@anon9713411](https://forum.universal-robots.com/u/anon9713411)\
**Post date:** [January 30, 2022, 11:03pm UTC](https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948/3 "2022-01-30T23:03:52Z")

</div>

I’m not quite sure. Based on this article one can migrate from CB2 to CB3 and e-series, but doesn’t list any specifics or details on how to do it or what is required.

## PRODUCT ALERT: END-OF-SUPPORT CB2:

> **[Universal Robots - Product Alert: End-of-Support CB2](https://www.universal-robots.com/articles/ur/documentation/product-alert-end-of-support-cb2/)**

---

<div class="post-metadata">

**Author:** ![swkim](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/swkim/32/3011_2.png) [@swkim](https://forum.universal-robots.com/u/swkim)\
**Post date:** [March 5, 2022, 11:10am UTC](https://forum.universal-robots.com/t/update-ur10-polyscope-to-newest-version/18948/4 "2022-03-05T11:10:21Z")

</div>

We have the same problem.  
Year and month of manufacture: April 16, 2014 UR10 CB2 model.  
I want to migrate the polyscope and upgrade it to CB3.