# Thread in URScript using python

**URL:** <https://forum.universal-robots.com/t/thread-in-urscript-using-python/8596>\
**Category:** URScript\
**Created:** [August 27, 2020, 10:55am UTC](https://forum.universal-robots.com/t/thread-in-urscript-using-python/8596 "2020-08-27T10:55:53Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Ebbe](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/ebbe/32/1413_2.png) [@Ebbe](https://forum.universal-robots.com/u/Ebbe)\
**Post date:** [August 27, 2020, 3:32pm UTC](https://forum.universal-robots.com/t/thread-in-urscript-using-python/8596/2 "2020-08-27T15:32:02Z")

</div>

Is this question related to this one: [URScipt + robot code](https://forum.universal-robots.com/t/urscipt-robot-code/8598) ?  
In the script manual you can see how to write a thread in your URScript. Making a python thread will only help you if you put the gripper functionality into the secondary program(remeber to disable the blocking functionality to reduse the time consumption).

---

_[View the full topic](https://forum.universal-robots.com/t/thread-in-urscript-using-python/8596)._