# Supply PSU48VDC on UR10 **URL:** \ **Category:** Technical Questions\ **Created:** [August 29, 2024, 10:28am UTC](https://forum.universal-robots.com/t/supply-psu48vdc-on-ur10/35852 "2024-08-29T10:28:58Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![hocine.bersi](https://avatars.discourse-cdn.com/v4/letter/h/7c8e57/32.png) [@hocine.bersi](https://forum.universal-robots.com/u/hocine.bersi)\ **Post date:** [August 29, 2024, 10:28am UTC](https://forum.universal-robots.com/t/supply-psu48vdc-on-ur10/35852/1 "2024-08-29T10:28:58Z")
UR10 work with 2 PSU 48VDC supply . is it able to run with only one ? I would like to put one of an UR10 safe on another UR10 defect … Thanks ---
**Author:** ![efn](https://avatars.discourse-cdn.com/v4/letter/e/35a633/32.png) [@efn](https://forum.universal-robots.com/u/efn)\ **Post date:** [September 3, 2024, 5:29am UTC](https://forum.universal-robots.com/t/supply-psu48vdc-on-ur10/35852/2 "2024-09-03T05:29:11Z")
I have never done it before personally, but if you wire a single 48V supply to both 48V inputs, then the controller should accept it. You will have to run with very low accelerations, I can imagine. 🙂 ---
**Author:** ![hocine.bersi](https://avatars.discourse-cdn.com/v4/letter/h/7c8e57/32.png) [@hocine.bersi](https://forum.universal-robots.com/u/hocine.bersi)\ **Post date:** [September 3, 2024, 6:29am UTC](https://forum.universal-robots.com/t/supply-psu48vdc-on-ur10/35852/3 "2024-09-03T06:29:15Z")
Thanks efn , i just received 2 brand new 48V supply and a current distributor so i will fix my problèm . ---
**Author:** ![efn](https://avatars.discourse-cdn.com/v4/letter/e/35a633/32.png) [@efn](https://forum.universal-robots.com/u/efn)\ **Post date:** [September 3, 2024, 6:33am UTC](https://forum.universal-robots.com/t/supply-psu48vdc-on-ur10/35852/4 "2024-09-03T06:33:09Z")
Glad to hear that. 🙂 It’s always a little risky not doing things how they’re supposed to be done.