# Shift On and Shift Off

**URL:** <https://forum.universal-robots.com/t/shift-on-and-shift-off/19877>\
**Category:** General Application Help: How do I?\
**Created:** [March 14, 2022, 9:09pm UTC](https://forum.universal-robots.com/t/shift-on-and-shift-off/19877 "2022-03-14T21:09:03Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![efn](https://avatars.discourse-cdn.com/v4/letter/e/35a633/32.png) [@efn](https://forum.universal-robots.com/u/efn)\
**Post date:** [March 15, 2022, 5:45am UTC](https://forum.universal-robots.com/t/shift-on-and-shift-off/19877/4 "2022-03-15T05:45:44Z")

</div>

How about shifting the planes? You should likely have a fair amount less planes than waypoints. 🙂  
Assign the plane to a variable and add a variable offset to the required coordinate(s). Then you can change the variable offset to shift all planes at once?

You can take a look here: [Move with Offset - #22 by m.hammerton](https://forum.universal-robots.com/t/move-with-offset/19528/22)  
There’s another thread very similar to yours, as far as I can tell.

---

_[View the full topic](https://forum.universal-robots.com/t/shift-on-and-shift-off/19877)._
