# Python 3 library to communicate with robot

**URL:** <https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461>\
**Category:** Robot Communication\
**Created:** [January 14, 2017, 5:39pm UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461 "2017-01-14T17:39:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon77093046](https://avatars.discourse-cdn.com/v4/letter/a/6f9a4e/32.png) [@anon77093046](https://forum.universal-robots.com/u/anon77093046)\
**Post date:** [January 14, 2017, 5:39pm UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461/1 "2017-01-14T17:39:03Z")

</div>

We at Rope Robotics Aps have developed a code library that we use as our basic communication with the UR robot and other devises. We would like to share this work with all of you, and if you have ideas or inputs they are more than welcome.

The code is made for python 3.x and shared under the MIT license, hence you are free to use it and are not obligated to share your work based on this use. But if you make improvement to the code it would be appreciated if you share.

You are also very welcome to contribute to the project.  
If you need help to get started with the code, please don’t hesitate to contact me.  
The code is available at Bitbucket:  
[https://bitbucket.org/RopeRobotics/ur-interface/](https://bitbucket.org/RopeRobotics/ur-interface/)

---

<div class="post-metadata">

**Author:** ![jbm](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/jbm/32/614_2.png) [@jbm](https://forum.universal-robots.com/u/jbm)\
**Post date:** [January 16, 2017, 6:49am UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461/2 "2017-01-16T06:49:34Z")

</div>

Martin,  
Thanks a lot for sharing!  
I hope many will contribute.

---

<div class="post-metadata">

**Author:** ![anon44705757](https://avatars.discourse-cdn.com/v4/letter/a/ec9cab/32.png) [@anon44705757](https://forum.universal-robots.com/u/anon44705757)\
**Post date:** [December 10, 2019, 12:54pm UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461/3 "2019-12-10T12:54:36Z")

</div>

I sent you an email for getting more knowledge.  
Thanks

---

<div class="post-metadata">

**Author:** ![anon59108369](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@anon59108369](https://forum.universal-robots.com/u/anon59108369)\
**Post date:** [September 2, 2020, 9:58am UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461/4 "2020-09-02T09:58:11Z")

</div>

Anyone used the RopeRobotics and would be willing to help me out a bit with uderstanding a code ?

---

<div class="post-metadata">

**Author:** ![anon59108369](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@anon59108369](https://forum.universal-robots.com/u/anon59108369)\
**Post date:** [August 4, 2021, 11:55am UTC](https://forum.universal-robots.com/t/python-3-library-to-communicate-with-robot/461/5 "2021-08-04T11:55:57Z")

</div>

Someone who uses it please correct me if I am wrong. But this software does not use any code on the polyscope i.e. thread that reads values of registers in 500HZ and so I do not believe you can implement an RTDE control?