# Problem with the "Move Here" button

**URL:** <https://forum.universal-robots.com/t/problem-with-the-move-here-button/1809>\
**Category:** URCap Development\
**Created:** [March 29, 2018, 9:58am UTC](https://forum.universal-robots.com/t/problem-with-the-move-here-button/1809 "2018-03-29T09:58:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon53917834](https://avatars.discourse-cdn.com/v4/letter/a/b2d939/32.png) [@anon53917834](https://forum.universal-robots.com/u/anon53917834)\
**Post date:** [March 29, 2018, 9:58am UTC](https://forum.universal-robots.com/t/problem-with-the-move-here-button/1809/1 "2018-03-29T09:58:04Z")

</div>

Hello everyone,

The first version of my URCap is near the end and I got a problem.

The "Move here " function is not working very well. I have to press maybe 5 times to the “Auto” button for seeing my robot moving. And it’s like that if my waypoint is inside or outside of my programNode.

Is it a software issue?

This problem is happening with the simulator and the real robot.

Can somebody help me?

Best regards,

Arnaud

---

<div class="post-metadata">

**Author:** ![anon62140534](https://avatars.discourse-cdn.com/v4/letter/a/a5b964/32.png) [@anon62140534](https://forum.universal-robots.com/u/anon62140534)\
**Post date:** [March 29, 2018, 12:51pm UTC](https://forum.universal-robots.com/t/problem-with-the-move-here-button/1809/2 "2018-03-29T12:51:26Z")

</div>

Arnaud,  
I feel your pain… There is nothing more challenging than knowing what you want to do and finding the right code to do it. You question is too broad for a specific answer so I would suggest you begin to solve the problem by writing a flow chart of each step and pairing that with your code. I think you will find your answer or the specific area in which you need help.  
More likely than not, this is a code issue.  
I would be more than glad to help, but you will need to sharpen your question first,  
Jerry
