# Problem on saving subprog

**URL:** <https://forum.universal-robots.com/t/problem-on-saving-subprog/6375>\
**Category:** Technical Questions\
**Tags:** bugs\
**Created:** [February 18, 2020, 6:44am UTC](https://forum.universal-robots.com/t/problem-on-saving-subprog/6375 "2020-02-18T06:44:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fujikit](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/fujikit/32/6042_2.png) [@fujikit](https://forum.universal-robots.com/u/fujikit)\
**Post date:** [February 18, 2020, 6:44am UTC](https://forum.universal-robots.com/t/problem-on-saving-subprog/6375/1 "2020-02-18T06:44:27Z")

</div>

**Software version** : …SW3.12  
**Robot generation** : …CB Series

**Steps to reproduce** :See the file below  
[bug.pdf](https://forum.universal-robots.com/uploads/short-url/mrQBX06VHvtM8Cs3huuZpyvOWTh.pdf) (188.2 KB)

**Expected behavior** : Save the urp file and it can be load on other program.

**Actual behavior** : Filename is without extension “urp” and it cannot be loaded on other program.

---

<div class="post-metadata">

**Author:** ![fujikit](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/fujikit/32/6042_2.png) [@fujikit](https://forum.universal-robots.com/u/fujikit)\
**Post date:** [April 23, 2020, 10:31am UTC](https://forum.universal-robots.com/t/problem-on-saving-subprog/6375/2 "2020-04-23T10:31:26Z")

</div>

Dear development support team.

I could verify this issue was fixed at SW3.13.  
Thank you very much.