# Pause-Prog Input not working in Remote Control Operational Mode

**URL:** <https://forum.universal-robots.com/t/pause-prog-input-not-working-in-remote-control-operational-mode/18495>\
**Category:** Technical Questions\
**Created:** [January 6, 2022, 7:15pm UTC](https://forum.universal-robots.com/t/pause-prog-input-not-working-in-remote-control-operational-mode/18495 "2022-01-06T19:15:20Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![MikeM](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/mikem/32/3114_2.png) [@MikeM](https://forum.universal-robots.com/u/MikeM)\
**Post date:** [January 7, 2022, 1:03am UTC](https://forum.universal-robots.com/t/pause-prog-input-not-working-in-remote-control-operational-mode/18495/2 "2022-01-07T01:03:57Z")

</div>

I’m seeing this issue as well when in **Remote Mode** only it’s the **Start-Prog**. I’ll check version of Polyscope I’m running when I get back on Monday but I know it’s 5.11 and robot was built last year.

Found this post [Unexpected Behavior of Start-Prog](https://forum.universal-robots.com/t/unexpected-behavior-of-start-program-input-in-polyscope-3-7/2767)

This might be a bug UR has to address, quick solve might be to restart controller. Not a good solution but I think it frees up resources again and it worked for me. Hope I don’t run into it again.

---

_[View the full topic](https://forum.universal-robots.com/t/pause-prog-input-not-working-in-remote-control-operational-mode/18495)._