# NC file not uploading

**URL:** <https://forum.universal-robots.com/t/nc-file-not-uploading/41809>\
**Category:** Technical Questions\
**Created:** [November 24, 2025, 7:32pm UTC](https://forum.universal-robots.com/t/nc-file-not-uploading/41809 "2025-11-24T19:32:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![angel.meza](https://avatars.discourse-cdn.com/v4/letter/a/b5ac83/32.png) [@angel.meza](https://forum.universal-robots.com/u/angel.meza)\
**Post date:** [November 24, 2025, 7:32pm UTC](https://forum.universal-robots.com/t/nc-file-not-uploading/41809/1 "2025-11-24T19:32:17Z")

</div>

I save my NC file of a toolpath from Solidworks and save it onto a USB drive. However when I go to upload the NC File after plugging in the USB into my polyscope the NC File does not show up. Does anyone know why my NC file wont pop up when I try to select a path.

Thank you

---

<div class="post-metadata">

**Author:** ![thomas.denepoux.pro](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/thomas.denepoux.pro/32/7365_2.png) [@thomas.denepoux.pro](https://forum.universal-robots.com/u/thomas.denepoux.pro)\
**Post date:** [November 25, 2025, 7:16am UTC](https://forum.universal-robots.com/t/nc-file-not-uploading/41809/2 "2025-11-25T07:16:21Z")

</div>

Hello,

Have you set the filter to “All files”?

 ![image](https://us1.discourse-cdn.com/flex020/uploads/universal_robots/original/2X/8/8919fe681be12af651bb11618aa08796cff75096.png)