# Move with Offset

**URL:** <https://forum.universal-robots.com/t/move-with-offset/19528>\
**Category:** Product Wishlist\
**Created:** [February 28, 2022, 10:03am UTC](https://forum.universal-robots.com/t/move-with-offset/19528 "2022-02-28T10:03:45Z")\
**Posts on this page:** 1\
**Showing post:** 22

<div class="post-metadata">

**Author:** ![m.hammerton](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@m.hammerton](https://forum.universal-robots.com/u/m.hammerton)\
**Post date:** [March 14, 2022, 11:11am UTC](https://forum.universal-robots.com/t/move-with-offset/19528/22 "2022-03-14T11:11:44Z")

</div>

cg1,

> [@cg1](#):
>
> You can do the exact same things for the planes.  
> AKA if you can “copy paste” an offset node it should be complety posible to resuse the plane with a similar offset.

Can you explain further  
How can you apply a plane as an offset to another plane?

I tried  
creating a plane (Stn1 X300, Y300, Z0, Rx0, Ry0, Rz0)  
creating a second plane (Offset X0, Y0, Z100, Rx0, Ry0, Rz0)

and taught a position waypoint\_1 to X0, Y0, Z0, Rx0, Ry0, Rz0 of Sn1 Plane

then nested within the move added an additional Move again with waypoint\_1 but set the feature this time to Offset plane

As expected the robot wants to move the tool to the middle of the base axis +100mm which it cant achieve!

---

_[View the full topic](https://forum.universal-robots.com/t/move-with-offset/19528)._
