# G-code conversion script

**URL:** <https://forum.universal-robots.com/t/g-code-conversion-script/38402>\
**Category:** Technical Questions\
**Created:** [February 5, 2025, 7:38am UTC](https://forum.universal-robots.com/t/g-code-conversion-script/38402 "2025-02-05T07:38:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjzhang](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/mjzhang/32/6631_2.png) [@mjzhang](https://forum.universal-robots.com/u/mjzhang)\
**Post date:** [February 5, 2025, 7:38am UTC](https://forum.universal-robots.com/t/g-code-conversion-script/38402/1 "2025-02-05T07:38:30Z")

</div>

How is G-code converted into coordinate positions on the CB series?

---

<div class="post-metadata">

**Author:** ![cg1](https://avatars.discourse-cdn.com/v4/letter/c/c77e96/32.png) [@cg1](https://forum.universal-robots.com/u/cg1)\
**Post date:** [February 5, 2025, 2:07pm UTC](https://forum.universal-robots.com/t/g-code-conversion-script/38402/2 "2025-02-05T14:07:52Z")

</div>

You need a specific URCap provided by UR.

> **[Remote TCP & Toolpath URCap](https://www.universal-robots.com/marketplace/products/01tP40000071NjTIAU/)**
>
> The Remote TCP Toolpath URCap makes it easier to program Universal Robots for process applications, such as dispensing, deburring, polishing, etc. First, this URCap allows you to set Remote Tool Center Points (RTCP), where the tool center point is...

---

<div class="post-metadata">

**Author:** ![mjzhang](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/mjzhang/32/6631_2.png) [@mjzhang](https://forum.universal-robots.com/u/mjzhang)\
**Post date:** [February 6, 2025, 3:25am UTC](https://forum.universal-robots.com/t/g-code-conversion-script/38402/3 "2025-02-06T03:25:09Z")

</div>

Thank you for your reply. Unfortunately, this can only be used in the E series; mine is the CB series UR3, not the UR3E.

---

<div class="post-metadata">

**Author:** ![cg1](https://avatars.discourse-cdn.com/v4/letter/c/c77e96/32.png) [@cg1](https://forum.universal-robots.com/u/cg1)\
**Post date:** [February 6, 2025, 12:14pm UTC](https://forum.universal-robots.com/t/g-code-conversion-script/38402/4 "2025-02-06T12:14:22Z")

</div>

Didn’t know that but I can see that you are right, sorry for the misinformation.

Then I don’t think that there are any, maybe somebody have made a script for personal use, but I have never seen seen any commercial product that can do this, besides URs own URCap.

Kind regards
