# Filename Problem when Importing Gcode **URL:** \ **Category:** Technical Questions\ **Tags:** bugs\ **Created:** [December 26, 2019, 4:24am UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944 "2019-12-26T04:24:34Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![anon95946124](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@anon95946124](https://forum.universal-robots.com/u/anon95946124)\ **Post date:** [December 26, 2019, 4:24am UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/1 "2019-12-26T04:24:34Z")
When I import G-code into installation tab URcap regular TCP then some G-code import and some are not. Also UR does not show any error notification. How much line limit of G-code line URe accept? ---
**Author:** ![anon41076874](https://avatars.discourse-cdn.com/v4/letter/a/cab0a1/32.png) [@anon41076874](https://forum.universal-robots.com/u/anon41076874)\ **Post date:** [January 1, 2020, 12:53am UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/2 "2020-01-01T00:53:45Z")
Would you mind sharing your G-code files here so that others can help you debug? ---
**Author:** ![anon95946124](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@anon95946124](https://forum.universal-robots.com/u/anon95946124)\ **Post date:** [January 1, 2020, 12:14pm UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/3 "2020-01-01T12:14:05Z")
The file type .nc is not supporting so click on the below link for all attached files and details. [Toolpath](https://technocratlabs.com/2020/01/01/regular-toolpath-with-ure-series/) ---
**Author:** ![anon41076874](https://avatars.discourse-cdn.com/v4/letter/a/cab0a1/32.png) [@anon41076874](https://forum.universal-robots.com/u/anon41076874)\ **Post date:** [January 8, 2020, 7:49am UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/4 "2020-01-08T07:49:56Z")
Thank you for sharing the G-code files. We were able to load the original G-code file onto our robot successfully. Would you mind sharing your program and installation files as well? I sent you a private message with my email address. ---
**Author:** ![ellingsen.harald](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/ellingsen.harald/32/1116_2.png) [@ellingsen.harald](https://forum.universal-robots.com/u/ellingsen.harald)\ **Post date:** [January 8, 2020, 12:22pm UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/5 "2020-01-08T12:22:47Z")
@anon95946124 What SW did you use to produce the G-code? Was it Inkscape? ---
**Author:** ![anon95946124](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@anon95946124](https://forum.universal-robots.com/u/anon95946124)\ **Post date:** [January 8, 2020, 12:40pm UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/6 "2020-01-08T12:40:18Z")
We are using fusion 360 CAD software for generating toolpath. Inkscape can not generate toolpath with .nc extension. ---
**Author:** ![anon41076874](https://avatars.discourse-cdn.com/v4/letter/a/cab0a1/32.png) [@anon41076874](https://forum.universal-robots.com/u/anon41076874)\ **Post date:** [January 9, 2020, 4:49pm UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/7 "2020-01-09T16:49:56Z")
Would you mind removing all the spaces in the file name and try again? ---
**Author:** ![anon95946124](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@anon95946124](https://forum.universal-robots.com/u/anon95946124)\ **Post date:** [January 11, 2020, 5:05am UTC](https://forum.universal-robots.com/t/filename-problem-when-importing-gcode/5944/8 "2020-01-11T05:05:27Z")
Now it’s working fine.