# Conveyer Tracking without Encoder

**URL:** <https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284>\
**Category:** URScript\
**Created:** [December 11, 2018, 10:15am UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284 "2018-12-11T10:15:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon88809163](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@anon88809163](https://forum.universal-robots.com/u/anon88809163)\
**Post date:** [December 11, 2018, 10:15am UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/1 "2018-12-11T10:15:01Z")

</div>

hello everyone,  
i want to use conveyor tracking.And i have a conveyor that has Monitor with a Speed/min on it. so can i without Encoder use the conveyor tracking?If can, how can i count the tpm?  
thx for your help.

---

<div class="post-metadata">

**Author:** ![jbm](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/jbm/32/614_2.png) [@jbm](https://forum.universal-robots.com/u/jbm)\
**Post date:** [December 11, 2018, 3:29pm UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/2 "2018-12-11T15:29:29Z")

</div>

Did you try the `set_conveyor_tick_count()` URScript function?  
This can be used to set the tick value from URScript.

---

<div class="post-metadata">

**Author:** ![anon88809163](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@anon88809163](https://forum.universal-robots.com/u/anon88809163)\
**Post date:** [December 11, 2018, 3:40pm UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/3 "2018-12-11T15:40:27Z")

</div>

hi,  
thx for your help,and i havent test it yet.Before i test it ,i also want to know how to caculate the tick? all i know for the conveyor is the diameter of the drive roller and the number of Speed/min.

---

<div class="post-metadata">

**Author:** ![jbm](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/jbm/32/614_2.png) [@jbm](https://forum.universal-robots.com/u/jbm)\
**Post date:** [December 11, 2018, 3:46pm UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/4 "2018-12-11T15:46:42Z")

</div>

When starting conveyor tracking, you enter a value as “ticks per meter” or “ticks per revolution” (for circular conveyors).  
For a linear conveyor if the “speed/min” is i.e. 30 meters, then (30 [m/min] / 60 [sec/min]) is 0,5 m/s.  
If “ticks per meter” is defined to 10000, then you should increment the “set\_conveyor\_tick\_count()” by 5000 every second.  
If on a CB3, the controller frequency is 125 Hz, then for every control cycle (8 ms) you should increment the tick count by (5000/125) 40 ticks.

---

<div class="post-metadata">

**Author:** ![anon88809163](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@anon88809163](https://forum.universal-robots.com/u/anon88809163)\
**Post date:** [December 11, 2018, 3:53pm UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/5 "2018-12-11T15:53:01Z")

</div>

thank you very much!You have totally answer my question! i will try it soon!  
best wishes!

---

<div class="post-metadata">

**Author:** ![anon88809163](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@anon88809163](https://forum.universal-robots.com/u/anon88809163)\
**Post date:** [January 9, 2019, 10:39am UTC](https://forum.universal-robots.com/t/conveyer-tracking-without-encoder/3284/6 "2019-01-09T10:39:43Z")

</div>

hallo i still have a question.The Robot use which command to make sure how fast is the conveyor?
