# Configurating a User Interface for the Teach Pendant

**URL:** <https://forum.universal-robots.com/t/configurating-a-user-interface-for-the-teach-pendant/1970>\
**Category:** URCap Development\
**Created:** [May 10, 2018, 3:06pm UTC](https://forum.universal-robots.com/t/configurating-a-user-interface-for-the-teach-pendant/1970 "2018-05-10T15:06:18Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![d.verhofstadt](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.universal-robots.com/d.verhofstadt/32/1466_2.png) [@d.verhofstadt](https://forum.universal-robots.com/u/d.verhofstadt)\
**Post date:** [April 27, 2023, 3:03pm UTC](https://forum.universal-robots.com/t/configurating-a-user-interface-for-the-teach-pendant/1970/10 "2023-04-27T15:03:04Z")

</div>

Hi Fred

If you want to create a User Interface on an e-series robot, than you could use our software.  
See my post [here](https://forum.universal-robots.com/t/teach-pendant-hmi/21703/5)

Kind regards  
Dieter

---

_[View the full topic](https://forum.universal-robots.com/t/configurating-a-user-interface-for-the-teach-pendant/1970)._