# Bug when moving screwdriver node

**URL:** <https://forum.universal-robots.com/t/bug-when-moving-screwdriver-node/15162>\
**Category:** Report a Bug\
**Created:** [June 28, 2021, 10:06am UTC](https://forum.universal-robots.com/t/bug-when-moving-screwdriver-node/15162 "2021-06-28T10:06:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon44063908](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@anon44063908](https://forum.universal-robots.com/u/anon44063908)\
**Post date:** [June 28, 2021, 10:06am UTC](https://forum.universal-robots.com/t/bug-when-moving-screwdriver-node/15162/1 "2021-06-28T10:06:07Z")

</div>

Hi,

About a month ago i reported a bug that was happening when commenting out a screwdriver node [Link](https://forum.universal-robots.com/t/bug-in-commenting-screwdriver-node/14566). I have found an related bug that also adds an until node. This happens when using the move feature (encircled in the picture below).

![MoveNode](https://us1.discourse-cdn.com/flex020/uploads/universal_robots/original/2X/6/6c939a954a36b4fb031b7b7a7e30b122f029f4eb.png)

This again happens with both my own screwdriving installation aswell as for the standard UR screwdriving installation.